## Our Equipment

Our equipment is geared towards safety and efficiency

## Portable Frac Separators

Our Portable Frac Separators are available for any pressure range between 0- 6.9MPa (o-1,000 PSI)

## 285 *Psi*

Our 285 PSI Portable Frac Separator

- Pressure – 1.9 MPa (285 PSI)
- Vessel size – 18 m
^{3}(151 bbls) - Gas rate – 560 x 10
^{3}m^{3}/day (20 mmcf/day) - Liquid rate (vessel) – 7950 m
^{3/day}(50,000 bbls/day) - 25 mm (2″) & 102 mm (4″) vortex meter run or 102 mm (4″) orifice meter run
- Dual compartments
- Adjustable fluid outlets
- Combination heating circulation system
- Steam coils
- ¼” mmbtu/hr heater
- Mounted on tridem lowboy trailer
- Capable of travel on 75% road bans
- Exceeds ASME Section VIII Division I, and ASME B31.3
- Exceeds NACE MR0175 CVN to -46°C for H
_{2}S service - Enclosed in an insulated and heated building
- 35 MPa (5000 PSI) injection pump

*740* Psi

Our 740 PSI Frac Separator

- Pressure – 5.1MPa (740 PSI); 4.9 MPa (720 PSI)
- Vessel size – 10m
^{3}(63 bbls); 15m^{3}(94.3 bbls) - Gas rate – 700 x 10
^{3}m^{3}/day (25 mmcf/day) - Liquid rate (vessel) – 6000 m
^{3}/day ( 37,740 bbls/day) - 25 mm (2″) & 102 mm (4″) orifice meter run
- 25 mm (1″) or 50 mm (2″) liquid turbine meters
- Two manways for easy cleanout
- Steam coils
- Sparge coil
- ¼” mmbtu/hr heater
- Mounted on tridem lowboy trailer
- Combination heating circulation system
- Automated level, pressure, and flow controls
- Exceeds ASME Section VIII Division I, and ASME B31.3
- Exceeds NACE MR0175 CVN to -46°C for H
_{2}S service - Enclosed in an insulated and heated building
- 35 MPa (5000 PSI) injection pump

## 1000 *Psi*

Our 1000 PSI Portable Frac Separator

- Pressure – 6.895 MPa (1000 PSI)
- Vessel size – 9.8m
^{3}(62.89 bbls) - Gas rate – 952 x 10
^{3}m^{3}/day (34 mmcf/day) - Liquid rate (vessel) – 2180.4 m
^{3}/day ( 13,000 bbls/day) - 25 mm (2″) & 102 mm (4″) V-cone meter run
- 50 mm (2″) liquid turbine meters
- Two manways for easy cleanout
- Sparge coil
- Steam coils
- Mounted on tridem lowboy trailer
- Automated level, pressure, and flow controls
- Exceeds ASME Section VIII Division I, and ASME B31.3
- Exceeds NACE MR0175, CVN to -46°C for H
_{2}S service - Enclosed in an insulated and heated building
- 35 MPa (5000 PSI) injection pump

## Frac Separators

Our Frac Separators are available in 2 models: 1440, 2160

*1440* Psi

Our 1440 Frac Separator

- Pressure – 9.9 MPa (1,440 PSI)
- Vessel size – 6.5 m
^{3}(41 bbls), 9.8 m^{3}(62 bbls) - Gas rate – 2.240 x 10
^{3}m^{3}/day (80 mmcf/day) - Liquid rate – 3,200 m
^{3}/day (20,000 bbls/day) - Solids – 1.5 m
^{3}(9.4 bbls), 3.65 m^{3}(23 bbls), - 152 mm (6”) senior orifice meter run
- 25 mm (1”) or 50 mm (2”) liquid turbine meters
- Two manways for easy cleanout
- Steam coils
- ¼” mmbtu/heater
- Automated level, pressure, and flow controls
- Exceeds ASME Section VIII Division I, and ASME B31.3
- Exceeds NACE MR0175 CVN to -46°C (-50°F) for H
_{2}S service - Enclosed in an insulated and heated building
- 35 MPa (5000 psi) and 69 MPa (10000 PSI) injection pump

## 2160 *Psi*

Our 2160 PSI Frac Separator

- Pressure – 14,893 kPa (2,160 PSI)
- Vessel size – 1.5 m
^{3}(9.44 bbl) - Gas rate – 1,831 x 10
^{3}m^{3}/day (65 mmscf/day) - Liquid rate (vessel) – 2,720 m
^{3}/day (17,000 bbls/day) - Liquid rate (meters) – 2,080 m
^{3}/day (13,000 bbls/day) - 102 mm (4″) senior orifice meter run
- Automated vessel pressure and flow control
- Exceeds ASME Section VIII Division I and ASME B31.3
- Exceeds NACE MR0175, CVN to -46°C (-50°F) for H
_{2}S service - Enclosed in an insulated and heated building

*Storage* Tanks

Our Quality Storage Tanks

- Pressure – 1,034 kPa (150 PSI)
- Vessel size – 60 m
^{3}( 377 bbls) - Gas rate – 278 x 10
^{3}m^{3}/day ( 10 mmcf/day) - Liquid rate – 5565 m
^{3}/day (35,000 bbls/day) - 102 mm (4″) orifice meter run
- Dual compartments
- Two manways for easy cleanout
- Steam coils
- Enclosed in an insulated and heated building
- Exceeds ASME Section VIII DivisionI + ASME B31.3
- Exceeds NACE MR0175, CVN to -46°C for H
_{2}S service